PS Vita NAND Pinout (Updated)

Since the last post on the eMMC pinout, I found the other two important test points. First is VCCQ, which is the power to the eMMC controller. It needs to be pulled at 1.8V. The other point is VCC, which is the power to the actual NAND flash. It needs to be pulled at 3.3V.

Found on the bottom of the board, above the SoC

Found on the bottom of the board, above the SoC

Found on the bottom of the board, near the multi-connector

Found on the bottom of the board, near the multi-connector

For reference, the pad of the removed eMMC on the second Vita

For reference, the pad of the removed eMMC on the second Vita